What is a Blade Putter? Understanding the Classic Golf Tool

Blade Putters were designed to provide more feel and control than other types of putters.

However, as with everything else over the decades, technology has improved and changed the way that these clubs are designed and manufactured.

This means that they are now more forgiving on off-center hits, and provide a more consistent stroke across all types of surfaces.

So what is a blade Putter?

A blade Putter has a thin, flat blade-like head with a rounded sole. The clubhead is usually made of stainless steel, and the shaft is made of graphite.

They were designed for longer putts as they provide better control and accuracy over mallet putters and if you have a slight arc to your putting stroke, then a blade putter is likely to be the best type of club for you.

When it comes to Blade Putters Scotty Cameron is a name that is synonymous with quality.

His putters have been used by some of the biggest names in professional golf, and he has become one of the most popular golf club makers in the world.

If you are looking for a top-quality blade putter, then Scotty Cameron is a name that you can trust.

What are Blade Putters Good For

itleist Scotty Cameron Special Select Newport 2 Putter

In general mallet putters provide golfers with more forgiveness, while blade putters give players a bit more work to do.

But, as we said before, technology has come a long way and there are now blade putters on the market that are just as forgiving as their mallet counterparts.

For example, the latest Cobra’s King 3D printed putter has SIK – Descending Loft Technology, which means that no matter where you hit the ball on the face, you will get the same roll and speed.

This ensures a much more consistent putting stroke.

If you tend to find your ball 5 or 10 feet away from the hole more often than not, then a blade putter can definitely help you improve your accuracy and get the ball closer to the hole.

Blade putters are designed for better control and accuracy on longer putts, and they are also a good choice for golfers who prefer a more traditional look at address.

If you are someone who likes to have a lot of control over your putting stroke, then a blade putter is likely the best option for you.

Can Beginners Use Blade Putters?

Cobra King 3D Printed - Front

The simple answer is yes, beginners can use blade putters. But the best advice I can give you is to go and get fitted for a putter.

Putting accounts to almost 50% of the game, so it’s important to have a club that you’re comfortable with.

And if you want to lower your scores then you definitely need a club that you can rely on.

I was talking to Matt and Johny recently, at our local fitting center, and they said that a lot of beginners come in asking for help with their putting.

They recommend that everyone should get fitted, regardless of their level of experience. This is because everyone has a different stroke, and what works for one person might not work for another.

The blade putters have come a long way over the years and the technology has drastically improved. To help with forgiveness the manufacturers have added heel-toe weighting, forged aluminum crowns, tungsten weights, and many other features.

So even if you’re a beginner, I would still recommend getting fitted for a blade putter. This way you can be sure that you have a club that is suited to your individual stroke, and that will help you lower your scores.

Are Blade Putters Harder to Hit?

Cobra King 3D Printed - Back

Most golfers believe that blade putter are harder to hit than mallet putters. But the truth is, it’s not the club that’s hard to hit, it’s the player. If you have a good stroke and you make solid contact, then you will be able to hit any type of putter.

The main difference between blade and mallet putters is s the weight distribution. Blade putters tend to have more weight in the head, while mallet putters have more weight distributed around the perimeter. This gives each type of putter a different feel.

You will also notice that mallet putters have better alignment aids built into the design.

This is because it’s easier to get your eye over the ball when the clubhead is wider. But, as we said before, if you have a good stroke then you will be able to hit any type of putter.

Some golfers prefer the feel of a blade putter, while others find it easier to control a mallet putter. It really comes down to personal preference.

Blade Putter vs Mallet Putter

Blade Putter

There are two main types of putters on the market, blade putters and mallet putters. But which one is better? The answer, as with most things in golf, is that it depends.

Blade putters are typically smaller and lighter than mallet putters. This can give them a bit more feel and control.

In my first golf set, I had a blade putter and it wasn’t my favorite. I couldn’t get used to the feel and I struggled to control it.

Mallet putters, on the other hand, are usually larger and heavier than blade putters.

This can make them a bit more stable and easier to control. I switched to a mallet putter a few years ago and I haven’t looked back since. I find it much easier to control my stroke and the ball goes where I want it to go.

So, which is better? It really depends on your personal preference. If you like the feel of a lighter club then a blade putter might be the best option for you.

If you prefer a heavier club then a mallet putter might be a better choice.

Best Blade Putters

Below are some of our favorite blade putters. If you’re in the market for a new putter then be sure to check them out.

Scotty Cameron Special Select Newport 2 Putter

Best Premium
Scotty Cameron Special Select Newport 2

Scotty Cameron is no doubt one of the best putter makers in the world. It's used by many professional golfers and it's won countless tournaments. 

The Scotty Cameron Special Select Newport 2 Putter is made with a solid stainless steel head and a mid-milled face pattern. It also has a flatter, narrower topline and a redesigned plumbing neck.

  • It has a flatter, narrower topline and a redesigned plumbing neck
  • Performance balanced weighing
  • Soft Tri-Sole Design, aesthetically pleasing view of the topline
  • Solid Milled Construction
We earn a commission if you click this link and make a purchase at no additional cost to you.

Cobra King 3D Putter

Our Favourite
Cobra King 3D Putter

The Cobra King 3D is our favorite blade putter. It's a great choice for golfers of all levels, from beginner to pro.

The multi-material construction gives the club a very solid feel, and the SIK Face Technology ensures that the ball will roll off the face smoothly and consistently. 

  • Traditional blade shape designed by using 304 stainless steel
  • Features single sightline alignment to help you aim more accurately
  • An aluminum face insert features SIK - Descending Loft Technology
  • Excellent feel and straighter putts
  • This putter is equipped with two 20g sole weights for +5g or -10g adjustability
  • Plumber neck hosel suitable for arc putting
We earn a commission if you click this link and make a purchase at no additional cost to you.

Cleveland Huntington Beach

Best Value
Cleveland Huntington Beach

This putter is great value packed into a sleek, premium design. It's perfect for those who want top performance without breaking the bank.

The Cleveland Huntington Beach putter is a great choice for golfers who are looking for a high-performing, yet affordable blade putter.

  • It features Speed Optimized Face Technology, which creates consistent ball speeds across the entire face of the putter. 
  • Huntington Beach also has a diamond CNC milling pattern that increases friction to create a pure roll and a softer feel at impact. 
  • Designed for forgiveness and consistency
We earn a commission if you click this link and make a purchase at no additional cost to you.

Mizuno M Craft I White Satin Putter

Great for Short Putts
Mizuno M Craft I White Satin Putter

This blade is great from a short distance. The neck is slanted, which will help with squaring the clubface. It's also forged from 1025 mild carbon steel for a softer feel and pure roll on shots.

The Mizuno M Craft I is a great choice for golfers who are looking for a top-performing blade putter.

  • Advance toe hang will help golfers who have a tendency to pull their putts.

  • Available in three striking finishes

  • Additional weight kit included to alter the feel of the putter

  • Premium quality Headcover included

  • Heavyweight stability, M-Craft's head promotes a fluid, rhythmical putting stroke


We earn a commission if you click this link and make a purchase at no additional cost to you.
The Golf Bandit
The Golf Bandit

Hi, I'm Jan. I love golf and I have been playing for a while now. I really enjoy trying out new golf clubs and equipment, and like to review them on my blog. I consider myself lucky as I have access to the latest clubs and gadgets, so I can get a feel for how they perform on the golf course. I also like to share my tips and tricks on how to improve your game, so if you're looking for help with that then look no further! Thanks for visiting, and I hope you find something useful here.

Articles: 245

Newsletter Updates

Enter your email address below and subscribe to our newsletter